Blog
Straightforward guides written by people who do this work every day.
Water pooling at the base of a water heater has several possible sources, and only one of them means the tank is done. This article walks through how to narrow down the cause and what each one means for repair.
A dripping temperature-pressure relief valve is either worn out or warning you about a pressure problem. Learn the difference and why this is one leak you should never ignore or cap off.
In humid weather, water heaters sweat, and that sweat looks alarming. This guide explains how to distinguish harmless condensation from an active leak that needs repair.
A burst fitting or failed tank can put inches of water across a garage in minutes. Here is a calm, step-by-step response plan for the first critical minutes.
The anode rod is the sacrificial component that keeps your steel tank from rusting through. Understand what it does, how it fails, and how it relates to tank leaks.
Gas and electric water heaters share some leak points but each has unique vulnerabilities and safety considerations. Know what to look for on your type.
Knowing where your shutoffs are before a leak happens is the difference between a mop-up and a flood. This is the two-minute skill every homeowner should have.
Most water heater leaks give warning signs long before they become emergencies. A simple maintenance routine catches them early.
Not every leak means a new water heater, but some do. This framework helps you understand how a professional weighs the repair-versus-replace decision.
Popping and rumbling sounds are usually sediment-related, and sediment is a leading contributor to tank failure and leaks. Here is what the noise means.
This small tank prevents pressure spikes that cause TPR discharge and stress your entire plumbing system. Learn how it works and how to spot failure.
Rusty hot water points to corrosion somewhere in the system. Learn how to determine whether the water heater or the piping is the culprit.
Tankless units do not have tanks to fail, but they still leak. These are the usual suspects, from condensate issues to seal failures.
Sediment is the slow killer of water heaters, insulating the tank bottom, overheating the metal, and accelerating corrosion that ends in leaks.
Water and pilot assemblies do not mix. If your pilot went out around the same time as a leak appeared, here is likely what happened and what to do.
A small sensor in the drain pan can alert you to a leak hours or days before you would notice it yourself. Here is how leak detection accessories work.
